Component mount (for vibration isolation)

Other anti-vibration table Passive

Performance/Features
Specifications/standards
Precautions for use
option
Related product

Hybrid mount combining original damping mechanism and "coil spring"

Performance/Features

・Easy handling
・No air source required
・No maintenance required

Improved vibration isolation performance due to the synergistic effect of horizontal natural frequency and vertical damping

In the horizontal direction, the natural frequency is kept low to further enhance the vibration isolation performance.

Vibration transmissibility

Performance measurement example KSC-600B 4 units/loading weight 2400kg

Decay time waveform

Specifications/Standards

KSC- 60A to 300A

・Performance guaranteed temperature range: 23±3℃
・Part names (1) Top of case (2) Bottom of case (3) Base plate (4) Rubber sheet

Part number	Static spring constant N/mm {kg/mm}	Supporting load kg	Vibration isolation performance
Part number	Static spring constant N/mm {kg/mm}	Supporting load kg	Natural frequency	Resonance peak
KSC-60A	74 { 8 }	60±10	Vertical: about 9Hz Horizontal: 2.5±0.5Hz	Vertical: 8 dB or less Horizontal: 15dB or less
KSC-80A	98 { 10 }	80±10
KSC-100A	123 { 13 }	100±25
KSC-150A	184 { 19 }	150±25
KSC-200A	245 { 25 }	200±25
KSC-250A	306 { 31 }	250±25
KSC-300A	368 { 38 }	300±25

KSC-400B～1000B

・Performance guaranteed temperature range: 23±3℃
・Part names (1) Top of case (2) Bottom of case (3) Base plate (4) Rubber sheet

Part number	Static spring constant N/mm {kg/mm}	Supporting load kg	Vibration isolation performance
Part number	Static spring constant N/mm {kg/mm}	Supporting load kg	Natural frequency	Resonance peak
KSC-400B	357 { 36 }	400+50-75	Vertical: about 7Hz Horizontal: 2.0±0.5Hz	Vertical: 8 dB or less Horizontal: 15dB or less
KSC-500B	446 { 45 }	500±50
KSC-600B	535 { 55 }	600±50
KSC-700B	624 { 64 }	700±50
KSC-800B	713 { 73 }	800±50
KSC-900B	802 { 82 }	900±50
KSC-1000B	892 { 91 }	1000±50

Precautions for use

Temperature dependence of damping material

・Please use in an environment of room temperature 23±3°C in order to maximize the performance of the component mount vibration isolation.
・Work slowly and quietly when placing a mechanical device on the component mount for vibration isolation.
・Be careful not to apply strong impact such as dropping. Doing so may cause damage, etc. Be especially careful when the temperature is low.

Option

Adjustment damper (Product number: CD-15)

It is an attenuation adjustment mechanism with a built-in original attenuation mechanism "Hanende SHDR".
It has the effect of speeding up the convergence of vibration in the horizontal direction by pressing it against the side of the stage supported by the component mount and speeding up the work takt.

Product information