Spring hanging type (rubber high pressure)

Seismic isolation flexible

system
Flexible type
specification

Combining two joints flexibly responds to input from various directions.: The MF suspension smoothly absorbs displacement and is not affected by floor conditions.

Click here for drawings, CAD, and construction instructions

system

* Building side and ground side fixed mounts are sold separately.
*The H system is shown as a representative example.

Cold/hot water, cold/hot water/cooling water

Workability	Working space	Cost
△	△	〇

・Achieves a short face distance with a unique structure that achieves both suppleness and high rigidity.
・Displacement is smoothly absorbed by the MF suspension.
・Construction is possible regardless of the condition of the floor surface.
・The P system is effective when the lifting height is low.

Flexible type

Cold/hot water, cold/hot water/cooling water

Rubber high pressure: G type

・Operating temperature: 70°C or less
・Working pressure: 0.98Mpa
・Flange material: SS400 (hot-dip galvanized)
・Wetted part rubber material: Synthetic rubber

The original solid ring method realizes high durability of the seal part.

Specification

Cold/hot water, cold/hot water/cooling water

Piping Nominal	standard Elbow length	Seismic isolation amount
		500mm	600mm	700mm	800mm
		Flexible cable length	Flexible cable length	Flexible cable length	Flexible cable length
20A	80	900	1000	1200	1300
25A	97	900	1000	1200	1300
32A	112	900	1000	1200	1300
40A	95	900	1000	1200	1300
50A	97	900	1000	1200	1300
65A	118	900	1000	1200	1300
80A	137	900	1000	1200	1300
100A	158	900	1000	1200	1300
125A	196	900	1000	1200	1300
150A	235	900	1000	1200	1300
200A	311	1000	1100	1300	1400
250A	389	1100	1300	1400	ー
300A	465	1200	1400	1500	ー

Product information